Nexx Garage User Manual

INSTALL MOBILE APP & CREATE ACCOUNT.
2
TEST DEVICE FOR OPENER COMPATIBILITY.
Use the included single wire or take a straightened-out paper clip and put one
end to one of 2 terminals that the wall button wires go to and the other end of
the paper clip to the other terminal. By doing so, your garage door should
activate. Check out Nexx Garage website http://nexxgarage.com/videos for
video of this test.
If this test fails your device may not be compatible so STOP and contact
customer support: support@nexxgarage.com.
1
Below is an outline of the steps in the installation process.
Please refer to the Manual for more detailed instructions.
INSTALLATION STEPS
TOOLS NEEDED
CB
A
Flatbed screwdriver Step ladder Masking tape
CHECK BOX CONTENT
FE
D
C
B
A
Door sensors and cable
4 self-tapping screws
Installation Manual
Nexx Garage device
8 double-sided tapes
Single Wire
CONTACT
Website: www.nexxgarage.com
Customer Service/Tech Support: support@nexxgarage.com
Product Return: return@nexxgarage.com
NEXX GARAGE QUICK START GUIDE
Thank you for your purchase of Nexx Garage!

Nexx Garage Specifications

General

Voice Control	Amazon Alexa, Google Assistant
Connectivity	Wi-Fi
App Support	iOS and Android
Features	Remote control, scheduling, notifications
Security	Encrypted communication
Warranty	1-year limited warranty

Summary

Contact Information

Package Contents

Tools Required for Installation

Installation Steps

Test Device for Opener Compatibility

Check garage door opener compatibility using a wire or paper clip. Contact support if it fails.

Install Mobile App and Create Account

Download and install the Nexx Garage mobile app and create a user account.

Register Device and Set Up Wi-Fi

Plug in, log in, register device, and connect to home Wi-Fi network.

Test Sensors for Notifications

Test door sensors for proper notification functionality. Contact support if sensors fail.

Mount the Device

Physically attach the Nexx Garage device to its designated location.

Connect Device to Opener

Establish the physical connection between the Nexx Garage device and the garage door opener.

Power Up Nexx Garage Device

Supply power to the installed Nexx Garage device.

Mount the Sensors

Install the door sensors in their correct positions.

Test Mobile App for Notifications

Verify that the mobile app is receiving notifications correctly.

Return Policy

Warranty Information