NGS WILD DUB ZERO - Battery Mode; Technical Specifications; Charging the Battery

USER’S MANUAL
8
TECHNICAL SPECIFICATIONS
TWS
USB / SD / BT / AUX inputs
Microphone input
Guitar input
LED screen
LED lights
AUX output
Input voltage: AC 100V-240V 50/60Hz
Frequency range: 20Hz ~ 20kHz
WILDDUB1 WILDDUB ZERO
Output power
(Peak power): 300W 120W
Bluetooth operation frequency: 2402-2480 MHz 2402-2480 MHz
Max RF output power: 6.58 dBm 6.58 dBm
Woofer size: 2 x 8” 1 x 8”
Tweeter size: 2 x 3” 2 x 3”
RMS power: 80W 20W
Battery: 11.1V/5.2A 11.1V/2.2A
Battery life:
At 100% volume 3 hours 3 hours
At 70% volume 7 hours 4.5 hours
At 50% volume 12 hours 7 hours
1. Put the switch on the back to battery position.
2. Switch on the speaker by pressing the STANDBY button.
BATTERY MODE
1. Connect one end of the power cable to the speaker and the
other end to the electricity supply.
2. A red LED will appear on the screen while it is charging.
3. When the battery is fully charged the red LED will
disappear and a green LED will appear.
CHARGING THE BATTERY