X1 System Status Indicators (Front Panel)
Located on the right hand side of the front panel are two LEDs. They are used to indicate the func-
tional status of the X1 Crossover.
P - Power LED (green) - indicates the X1 is on and in a ready condition.
S - Standby LED (amber) - indicates the X1 crossover is in "standby" mode.
X1 Fine Tuning Chart
The chart below was developed to assist you in the further fine tuning of your subwoofer or tower system. Should you be
unable to achieve satisfactory performance from your iWS subwoofer system using the fine-tuning chart, contact your
authorized NHT dealer or call our Customer Hotline at 1-800-NHT-9993 (648-9993).
To Next Page
Loading...
