Need help?Do you have a question about the NHT SA-3 and is the answer not in the manual?
General| Total Harmonic Distortion | <0.05% |
|---|---|
| Dimensions | 3.5" x 8.5" x 11" |
| Weight | 9 lbs |
| RMS Power per Channel @ 8 Ohms | 100W |
| THD+N | <0.1% |
| Signal to Noise Ratio | >95dB |
| Frequency Response | 20Hz - 20kHz |
| Power Output into 8Ω (stereo) | 100W |
Instructions for making proper audio connections to the SA-3 amplifier and subwoofer.
Detailed wiring diagram and instructions for connecting the SA-3 using Method #1.
Detailed wiring diagram and instructions for connecting the SA-3 using Method #2.
Connection and setup guide for biamplification using the SA-3's high-pass filter.
Common issues, LED indicators, and solutions for amplifier operational problems.
To Next Page
