Need help?Do you have a question about the NHT SA-2 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Total Harmonic Distortion | <0.1% |
| Amplifier Class | AB |
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 47 kΩ |
| Input Sensitivity | 1.0 V |
Detailed safety and operating instructions to prevent hazards and ensure proper use.
How to adjust subwoofer phase and volume for optimal blending with main speakers.
Overview of four connection methods based on speaker size and receiver capabilities.
Connects SA-2 for low bass extension with main speakers running full-range.
Connects SA-2 between receiver's Pre-Out and Main-In for high-pass filtered satellites.
Connects SA-2 at speaker level with a fixed 100Hz high-pass filter for satellites.
Connects SA-2 at speaker level for full-range speakers without high-pass filtering.
To Next Page
