Need help?Do you have a question about the NI 9217 and is the answer not in the manual?
Specifies the maximum voltage allowed for all terminals connected to COM.
Details the isolation voltage between channels and other grounding points.
Defines continuous and withstand voltage limits for channel-to-earth ground based on altitude.
Covers precautions for hazardous voltage wiring, insulation, and live terminals.
Specifies suitability for Class I, Division 2 and Zone 2 locations and related operational cautions.
Specifies the maximum voltage allowed for all terminals connected to COM.
Details the isolation voltage between channels and other grounding points.
Defines continuous and withstand voltage limits for channel-to-earth ground based on altitude.
Covers precautions for hazardous voltage wiring, insulation, and live terminals.
Specifies suitability for Class I, Division 2 and Zone 2 locations and related operational cautions.
General| Input Channels | 4 |
|---|---|
| ADC Resolution | 24-bit |
| Operating Temperature | -40 °C to 70 °C |
| Storage Temperature | -40 °C to 85 °C |
| Isolation | Channel-to-earth ground |
| Cold-Junction Compensation (CJC) | Yes |
| Input Type | Thermocouple, Voltage |
| Measurement Type | Temperature, Voltage |
| Resolution | 0.02 °C |
| Sampling Rate | 14 S/s (per channel) |
| Power Consumption | 1.5 W |
| Connector Type | Screw terminal |
| Thermocouple Types | J, K, T, E, N, R, S, B |
| CJC Accuracy | ±0.5 °C |
| Relative Humidity | 10% to 90% (noncondensing) |
| Shock | 30 g |
| Vibration | 5 g |
To Next Page
