Niagara JACE-6E - User Manual

Part Number 12762 Rev 1.1 | April 30, 2014
INSTALL GUIDE
NETWORK CONTROLLER 3E & 6E
MOUNTING AND WIRING GUIDE
14
The JACE-3E and JACE-6E controllers
are compact, embedded
controller/server platforms that allow
integrated control and management of
external devices over the Internet.
The JACE-3E uses a PowerPC 405
400Mhz processor; the JACE-6E uses a
PowerPC 440 524Mhz processor.
Each controller supports two optional
communications cards as well as
optional I/O expansion modules.
Onboard static RAM (SRAM) provides
NiagaraAX station backup capability
without any battery installed. An
optional backup battery is also
available.

Summary

Precautions

Safety Precautions

Provides warnings about electrical shock, fire risk, and proper operating environment to prevent injury or damage.

Static Discharge Precautions

Outlines measures to protect sensitive electronic components from damage caused by static electricity.

Battery Precautions

Highlights risks associated with the optional NiMH battery, including handling, disposal, and potential fire hazards.

Mounting

Environmental Requirements

Specifies the allowable ambient operating temperature, humidity, and pollution degree for the controller.

Wiring Details

Grounding

Power Wiring

Covers approved power sources (NPB-PWR, NPB-PWR-UN, WPM-XXX) and how to connect them to the controller.

Communications Wiring

Power Up and Initial Checkout

About Backup Configurations

Maintaining the Controller

NiMH Battery Installation and Maintenance

Niagara JACE-6E Specifications

General

Brand	Niagara
Model	JACE-6E
Category	Controller
Language	English