Nibco PC-20M - Page 8

HE.13631 © 05/2010
PC-20M
Instruction Manual
VII
Tab. 1
When Why
20 sec
after working cycle
2 x
after inserting the battery Self check
20 sec/2Hz
after working cycle
20 sec/5Hz
while exceeding the temp. limit Unit too hot
20 sec
20 sec/2Hz
after working cycle
+
1 x
1 x
after working cycle Error: the required pressure has not been reached.
The operator has interrupted the pressing cycle
manually while the motor was not running.
3 x 3 x
3 x
after working cycle Serious Error: The pressure has not been reached
while the motor was running.