HE.13631 © 05/2010
PC-20M
6
US
Instruction Manual
Attention
Inspect the tool before use. Replace any worn or damaged parts. A damaged or improperly assembled tool
can break and strike bystanders.
Attention
For your own safety please observe all national and European safety regulations.
The user needs to make sure that the pressing jaws are completely closed and that there are no foreign objects
(e.g. plaster or stone fractions) between the pressing jaws.
3.2 Explanation of the application range
Attention
Using the tool too intensively can cause heat damage to the tool.
Attention
During the operation of built-in electric motors, sparks can occur which might ignite highly infl ammable or
explosive liquids and materials.
Attention
Electric tools must not be operated in pouring rain or under water.
3.3 Installation instructions
Please reference the installation instructions of the systems supplier before assembling the fi ttings on the pipes. In
order to ensure a proper pressing and to guarantee safe and reliable handling, the machine must only be operated
with pressing jaws recommended by the provider of the pipe system and/or the tool manufacturer. If the markings on
the tool and pressing jaw do not match or if there are no assembly instructions, the user should contact the provider
of the system to request a compatibility statement.
Attention
Do not use bent or damaged pressing jaws.
To Next Page
Loading...
Need help?
General