Program settings
MENU SETTINGS
Caution
RPP 10 is not connected to a zone, and therefore
you cannot make the same settings as with other
wireless units.
MENU 5.4 – WIRELESS UNITS
In this menu you connect wireless units, and manage set-
tings for connected units.
Add the wireless unit by pressing "Add unit". For the quickest
identification of a wireless unit, it is recommended that you
put your master unit in search mode first. Then put the
wireless unit in identification mode.
MENU 5.4.5 – REPEATER RPP 10
Name unit
Enter a name for the relevant repeater.
Identify
Setting range: on/off
Delete unit
Setting range: yes/no
Name unit: Here, you name your repeater RPP 10.
Identify: When the function is activated, the LED indicator
on RPP 10 flashes green so it can be identified.
Delete unit: Here, you can choose to remove the unit.
MENU 6.2 – SCHEDULING
In this menu, you schedule the power outlet in RPP 10 to
control the times at which the current will be turned on and
off.
Caution
A schedule repeats according to the selected set-
ting (e.g. every Monday) until you go into the menu
and switch it off.
13RPP 10 | EN
To Next Page
Loading...
