To Next PageTo Next Page
Need help?Do you have a question about the Nibe UKV 40 and is the answer not in the manual?
General| Brand | Nibe |
|---|---|
| Model | UKV 40 |
| Category | Water Heater |
| Language | English |
Manual describes installation/service by specialists. Must be left with customer.
Appliance use by children/persons with reduced capabilities, with supervision.
Explains symbols for danger (NOTE) and important considerations (Caution).
Serial number location and importance for fault reporting.
Guidelines for proper disposal of packaging and used products.
Checking shut-off valves during installation commissioning.
Checking the safety valve during installation commissioning.
Regular inspection of the safety valve (approx. 4 times/year) to prevent blockages.
Contact installer for service, providing serial number and installation date.
Overview of UKV 40's diverse uses and benefits for heating systems.
Guidelines for safely transporting and storing the accumulator tank.
Detailed instructions for vertical wall mounting and securing the unit.
Installing UKV 40 to increase system volume when below minimum recommended for heat pump.
Installing UKV 40 as volume/flow increaser when system volume is low or flow is restricted.
All pipe installation must follow current norms and directives.
Requirements for safety valve (max 6 bar) and overflow pipe installation.
Ensuring clean incoming water and seeking advice if uncertain.
Step 1: Venting the accumulator tank using connection XL8.
Step 2: Filling the tank through the drain valve.
Step 3: Closing connection XL8 after air-water mixture exits.
Visual representation of the product's physical dimensions.
Information on pipe connections XL1 and XL8, including sizes.
Details on volume, weight, pressure, temperature, and part number.
Information on energy efficiency class, heat loss, and volume for labelling.
