Nibe EMINENT-35 E User Manual

MOS 1208-8
EVH-16: 35/55/100/120
611940
EMINENT-E/CU/R 35, 55, 100, 120
MONTERINGS- OCH SKÖTSELANVISNING EMINENT-E/CU/R 35, 55, 100, 120
SE
INSTALLATION AND MAINTENANCE INSTRUCTIONS EMINENT-E/CU/R 35, 55, 100, 120
GB
ASENNUS- JA HOITO-OHJEET EMINENT-E/CU/R 35, 55, 100, 120
FI
LEK

Nibe EMINENT-35 E Specifications

General

Voltage	230 V
Max water temperature	65 °C
Refrigerant	R134a
Volume	35 liters
Type	Air/Water Heat Pump Boiler
Water tank capacity	35 liters

Summary

Product Description and Components

Dimensions and Component Locations

Details the physical placement and dimensions of the water heater's parts.

General Information and Space Requirements

Provides essential details and space requirements for the water heater.

Component Identification and List

Identifies and describes each part of the water heater assembly.

Installation Guide

Assembly and Mounting Instructions

Instructions for physically putting together and mounting the water heater.

Pipe Installation and Filling Procedure

Guidance on pipe connections, valve fittings, and filling the water heater.

Mixing Valve Temperature Setting

How to set the mixing valve to control tap water temperature.

Electrical Installation

Electrical Setup and Thermostat Installation

Instructions for wiring the water heater and installing components like the thermostat.

Maintenance and Operation

Safety Valve and Sacrificial Anode Maintenance

Essential maintenance tasks including safety valve checks and anode inspection.

Emptying and Troubleshooting Guide

Steps for draining the water heater and handling operating disruptions.

Service and Technical Specifications