Need help?Do you have a question about the Nice Apollo 4300 SW and is the answer not in the manual?
General| Brand | Nice Apollo |
|---|---|
| Model | 4300 SW |
| Category | Gate Opener |
| Language | English |
The 1050 main control board is housed in a protective plastic enclosure with a 2-line LCD and navigation buttons.
Importance of safety devices, signs, infrared beams, and their proper installation.
Guidance on establishing the opener location and ensuring child safety around the gate system.
Instructions for periodic system testing, gate maintenance, and using the manual release.
States the gate system is intended solely for use with vehicular swing gates.
Covers critical safety points including pinch points, control placement, sensor installation, and maintenance.
Details on drilling and mounting the opener using concrete anchors and connecting wiring.
Overview of the basic learning and programming steps required for the gate opener unit.
Details the sequence for learning the control board, including gate travel and limit setup.
Instructions on how to place the control board into LEARNING MODE for programming.
Guides on programming SMXI/A receivers and FloR/A remote controls for gate operation.
Settings for adjusting the static and dynamic force sensitivity for gate movement.
Configuration options for gate speed settings, including Max, Standard, Low, and Slowdown.
Options for programming the gate's function, including Learn mode, Positions, Auxiliary Inputs, and Outputs.
Instructions on how to reverse the gate's travel direction if programmed incorrectly.
Lists common symptoms of gate opener issues and their possible solutions for diagnosis.
Step-by-step guide for programming the gate opener's limits and basic functions.
Instructions on how to reverse the gate's travel direction if programmed incorrectly.
Steps to place the Apollo 1050 control board into LEARNING MODE for initial setup.
To Next Page
