Need help?Do you have a question about the Nice Apollo Titan 912L and is the answer not in the manual?
General| Brand | Nice Apollo |
|---|---|
| Model | Titan 912L |
| Category | Gate Opener |
| Language | English |
Installer must read manual, ETL definitions for gate operators.
Introduction to the Titan 912L, its features, and specifications.
ASTM F2200, gate latches, specific applications, and general requirements.
Essential safety rules to prevent injury or death.
Importance of safety devices, signs, and personnel warnings.
Gate system safety, infrared beams, testing, and maintenance.
Follow instructions, intended use, and general warnings before installation.
Mounting the pivot arm and actuator, including push-to-open considerations.
Mounting control box and incoming power wiring.
Wiring actuator, limit switches, and motor connections to the board.
Adjusting limit switches and programming the controller via learning.
Description of auxiliary relay outputs and digital/analog inputs.
OVIEW, BLUEBUS, Master/Slave, and programming receivers/remotes.
Safety guidelines and wire gauge for AC power connections.
Chart for selecting solar panel wattage based on usage.
Fire, magnetic lock, guard station, and exit/edge input wiring.
Connecting a third-party radio receiver for remote control.
Ensuring continuous functionality, safety, and checking electrical/mechanical systems.
Diagrams for in-ground loops and photocells for safety.
Use of sensors and safety guidelines during installation.
Steps for engaging and disengaging the manual release.
Force, speed, acceleration, delay, function, and display settings.
Event programming, charger, standby, advanced settings, and defaults.
To Next Page
