19
Manual Release
In Locked Position
RUBBER
KEY
COVER
14 - MANUAL RELEASE/MANUAL OPERATION
1.
Close handle
2.
Rotate key 90° counterclock wise
and remove key.
3. Replace rubber key cover.
4. Operator is now in
Automatic Mode.
Manual Release Disengage
FIGURE 13 -3 MANUAL RELEASE DISABLE
1. Lift rubber key cover and insert
key into lock and ro
tate 90°
clockwise.
2. Lift handle
3. Operator is now in Manual
Mode.
Manual Release
Safety Manual Lock
In Released Position
90°
FIGURE 13 -2 MANUAL RELEASE