Nice Domi WS - Page 15

English – 15
EN
Programming/binding with BIDI Awning
“B”
“B”
01 02
X 1
X 2
“B”
X 2
X 3
03
“B”
“B”
01 02
X 1
X 2
“B”
X 2
X 3
03
X 1
“B”
“B”
01 02
X 1
X 2
“B”
X 2
X 3
03
“B”
“B”
01 02
X 1
X 2
“B”
X 2
X 3
03
X 1
Hold down (2-4s)  LED Release  LED Wait Wait
Hold down (2-4s) 
Sequence Release  LED Wait Wait
Hold down  LED Wait (*) Release
Hold down  LED Wait (*)
(*) If the memorisation procedure is successful, you will hear 3 beeps.
(*) If the memorisation procedure is successful, you will hear 3 beeps.
(red)
(green)
(red)
(red)
(green)
flashing
flashing
To escape the procedure at any point
To escape the procedure at any point
NOTE
NOTE
Press the programming of the already
memorised transmitter
Press the programming of the already
memorised transmitter
Press the key ▼ or third channel to
enter the programming mode
Press the key ▼ or third channel to
enter the programming mode
“LED”
(red-green)