English – 3
EN
01.
03.
02.
04.
2
1
2
command that has been sent.
Also take into consideration that when the batteries are flat the range
can be reduced by 25÷30 %.
Once the functioning has been assured, fix the DS100 at a suitable height
as follows (fig. 2):
01. Unscrew the retaining screw
02. Remove the base of the digital selector and screw it to the wall
03. Connect the digital selector to the support fixed to the wall, hooking it to
the upper part of the support
04. Fix the selector to the support with the retaining screw
To Next Page
Loading...
Need help?
General
