Nice E FIT S 619 BD - Page 20

 4
5
end
10
sec.
?
1 /
2 /
3 /
4 /
5 /
= 5 sec
3
After about 10 seconds, the motor performs a num-
ber of movements equal to the number of pulses
entered.
Hold down the button and release it after 5
seconds;
count 3 movements.
(*) = Factory setting.
C.5 - “FRT” Function: automatic tensioning of the canvas when opening awnings that
are not fitted with a mechanism to lock the awning when opening
MONO
BiDi
NOTES AND WARNINGS
• The “FRT” function may be programmed exclusively after having programmed the limit switch heights “0” and “1”.
• Position “2” must be a point between limit switch “1” and limit switch “0”.
1 2 3 4
 5
= 1 sec
“1
”
PRG
= 1 sec
2
PRG
= 1 sec
2
Move the awning to
a half-way position.
Hold down the but-
ton and
Hold down the but-
ton and
count 2 movements. Hold down the but-
ton and
count 2 movements.
5 6 7
 8
PRG
= 1 sec
3
= 5 sec
4
“1
”
“2”
2/3 cm~
Hold down the but-
ton and
count 3 movements. Hold down the but-
ton and
release them after 5
seconds;
count 4 movements.
8
end
= 5 sec
3
Hold down the but-
ton and
release them after 5
seconds;
count 3 movements.
C
19 – English