Need help?Do you have a question about the Nice E EDGE SI 228 LI ION and is the answer not in the manual?
Identifies the motor model and the language of the instructions.
Critical safety guidelines for installation and use to prevent damage and injury.
Specific warnings and precautions for the motor installation process.
Details motor features like radio control, encoder technology, and security systems.
Illustrates motor installation scenarios with and without a protective box.
Essential pre-installation checks and limitations for motor operation.
Provides instructions for the physical assembly and installation of the tubular motor.
Guidance on installing radio transmitters and climate sensors.
Visual guide for assembling gear wheels, drive wheels, and motor brackets.
Illustrates electrical connections, battery charging via USB, and switch operation.
Overview of procedures for motor configuration and adjustment with transmitters.
Explains setting UP, DOWN, and intermediate positions for automatic stopping.
Important advice and warnings regarding the process of memorizing radio transmitters.
Guidance on programming multiple motors using a single transmitter channel.
Important guidelines and notes to follow before starting any programming procedure.
Step-by-step guide to memorize the initial radio transmitter for basic control.
Procedure to temporarily disable motors not involved in current programming.
Detailed steps for manually setting the upper ('0') and lower ('1') limit positions.
Completes the limit switch setup by programming the DOWN position ('1').
Guide to setting custom intermediate stopping points for the awning's movement.
Procedures for adding multiple transmitters using standard button configurations.
Instructions for assigning specific commands to individual buttons on new transmitters.
Procedure for pairing a radio-connected climate sensor with the motor.
Steps for deleting all or individual transmitters from the motor's memory.
Procedure for memory management when using a transmitter not previously programmed.
Configures the sensitivity levels for the obstacle detection safety feature.
Explains the interplay between cruise speed, acceleration, and movement duration settings.
Sets the operational speed of the awning for smooth and precise movement.
Configures the rate of acceleration and deceleration for smoother start/stop transitions.
Sets the total time for the awning's movement cycle, influencing operational speed.
Details how to operate the awning using transmitter commands, including speed variation.
Instructions for charging the internal battery and checking its charge status.
Enabling/disabling automatic commands from climate sensors and their operational behavior.
Explains the status and error codes indicated by the motor head's LED lights.
Provides solutions for common operational issues and errors encountered with the motor.
Information on responsible product disposal and key technical specifications.
Details EU and FCC compliance for the radio equipment.
To Next Page
General
