EasyManuals Logo

Nice Era Plus L User Manual

Default Icon
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
English – 13
EN
5.16 - Adjustment of “Sun” climate sensor (ref. paragraph 6.2.3)
At the factory, the intervention threshold to is set at level 3 and to change it you must take the following steps.
Before starting the procedure, move the shutter/awning to the mid-point of its stroke.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Briefly press the t key a few times, depending on the level you want to set for the intervention threshold:
1 press = 5 Klux
2 presses = 10 Klux
3 presses = 15 Klux (factory setting)*
4 presses = 30 Klux
5 presses = 45 Klux
After about 10 seconds, the motor performs the number of movements indicated by the level number selected. Note – If this does not occur, cancel the proce-
dure. this way, the adjustment is completed without changing the factory setting.
04. Keep the n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
1 /
2 /
3 /
4 /
5 /
10
sec.
03
0,5
sec.
x 1 = 5 Klux
x 2 = 10 Klux
x 3 = 15 Klux (*)
x 4 = 30 Klux
x 5 = 45 Klux
5
sec.
01 02
5
sec.
04
5
sec.
3
2
?
3
Note: • When performing the procedure, you can cancel it at any time by keeping the n and t keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements. • If you use a sensor equipped with a “trimmer”, you must read the sensor instructions and ad-
just the threshold directly on the sensor.
––– Procedure 5.16 ––– executable only with a series transmitter Era P and Era W
10
sec.
04
0,5
sec.
x 1 = 5 Klux
x 2 = 10 Klux
x 3 = 15 Klux(
*
)
x 4 = 30 Klux
x 5 = 45 Klux
5
sec.
01
1
sec.
PRG
02
1
sec.
PRG
03
2
2
3
05
1 /
2 /
3 /
4 /
5 /
5
sec.
?
3
(*) - Factory setting
5.17 - Adjustment of “Wind” climate sensor (ref. paragraph 6.2.3)
At the factory, the intervention threshold to is set at level 3 and to change it you must take the following steps.
Before starting the procedure, move the shutter/awning to the mid-point of its stroke.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Briefly press the s key a few times, depending on the level you want to set for wind threshold:
1 press = wind at 5 Km/h
2 presses = wind at 10 Km/h
3 presses = wind at 15 Km/h (factory settings)*
4 presses = wind at 30 Km/h
5 presses = wind at 45 Km/h
After about 10 seconds, the motor performs the number of movements indicated by the level number selected. Note – If this does not occur, cancel the proce-
dure. this way, the adjustment is completed without changing the factory setting.
04. Keep the n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nice Era Plus L and is the answer not in the manual?

Nice Era Plus L Specifications

General IconGeneral
BrandNice
ModelEra Plus L
CategoryEngine
LanguageEnglish

Related product manuals