Nice ERA TIME User Manual

3 – English
EN
PROCEDURE 1 - Making the BASIC SETTINGS after powering up the transmitter
Step 1 Step 2 Step 3
example:
ok
example:
ok
example: Friday
Su Mo Tu We Th Fr Sa
ok
set the HOUR conrm set the MINUTES conrm set DAY (name)
(1)
conrm
Step 4 Step 5 Step 6
example:
ok
example:
ok
example:
ok
set the YEAR
(2)
conrm set the MONTH (number)
(3)
conrm set DAY (number) conrm
Step 7
(5)
- end
NOTES:
(1) - Su = Sunday; Mo = Monday; Tu = Tuesday; We = Wednesday; Th = Thursday;
Fr = Friday; Sa = Saturday.
(2) - Range: 2014 to 2059.
(3) - January = 01; February = 02; March = 03; (.....); December = 12.
(4) - Refer to Table D to select the location closest to you. Then enter the code for the
location in question in Step 7.
(5) - When you complete Step 7, the main screen displays (see Chapter 4).
example:
ok
set the LOCATION
(4)
conrm
2.2 - Memorizing the transmitter in the automations’ receivers
To use the transmitter, it must first be memorized in the memory of the automation/s you wish to control with it.
• To memorize the transmitter, run Procedure 2, if no transmitters have yet been memorized in the automation in question, or Procedure 3, if one or more transmitters have
already been memorized.
• When running the procedure, you must select a group (i.e. the transmission channel) to which the automation in question is assigned; we recommend reading Chap-
ter 1 carefully before starting.
• Repeat the procedure for each automation you will be controlling with the transmitter.
Caution • Since the transmitter will be memorized by all receivers in the transmitters range, before starting the procedure shut off power to any motors and receivers you do
not wish to memorize the transmitter. • All memorization sequences are timed, i.e.they must be completed within the indicated time limits.

Nice ERA TIME Specifications

General

Brand	Nice
Model	ERA TIME
Category	Transmitter
Language	English