Nice MIGHTY MULE EXIT WAND User Manual

WARNING
WARNING
!
SENSOR with 50, 100 or 150
feet of Direct Burial Cable
Warning Signs (2)
Wire Nuts (2)
Battery Connection Wires (2)
Double Spade
Connectors (2)
Ty-Wraps (4)
Wire Clamp
!
WARNING
GATE OPENING SENSOR IN USE
The Automatic Gate Opener is activated when a
vehicle comes within range of the sensor buried
along side the driveway and could possibly be
activated by a child on a bicycle, tricycle or other
metal play equipment.
Parts Identication:
EXIT WAND
Installation Manual
WARNING
When an EXIT WAND is in use, the automatic gate opener could be activated by a child on a bicycle or
other metal play equipment. This product is not recommended for applications exposed to children.

Nice MIGHTY MULE EXIT WAND Specifications

General

Brand	Nice
Model	MIGHTY MULE EXIT WAND
Category	Gate Opener
Language	English

Summary

Parts Identification

Safety Warning

Product not recommended for applications exposed to children due to activation by metal play equipment.

Installation Overview

Sensor Functionality

Sensor detects iron-based metal in motion based on mass, velocity, and proximity for gate activation.

Wiring the Wand

Connect sensor wires to gate opener control board terminals for gate operation.

Wiring Diagram Examples

Power Input Connection

Connect power input wires to the battery's positive and negative terminals as instructed.

Calibration Procedure

Allow 60 seconds of undisturbed operation for self-test and calibration after initial power-up.

Technical Specifications

Troubleshooting Tips

Ensure correct connections and allow calibration time for proper wand operation.

Limited Warranty

12-month warranty against defects, excluding damage from misuse or improper installation.