To Next PageTo Next Page
Need help?Do you have a question about the Nice Mighty Mule MM271 and is the answer not in the manual?
General| Power Supply | 12V DC |
|---|---|
| Control Type | Remote Control |
| Weather Resistant | Yes |
| Battery Backup | Yes |
| Battery | 12V 7Ah |
| Max. Gate Opening Angle | 90 degrees |
| Solar Panel Included | Optional |
| Light-Duty | Yes |
| Maximum Gate Weight | 300 lb |
| Maximum Gate Length | 12 ft |
| Battery Type | Lead Acid |
| Remote Controls Included | Yes |
| Warranty | 12 month |
Initial steps and information before beginning gate opener installation.
Learn how to manually operate the gate when the operator is disconnected.
Guidelines for safe gate operation, installation, and usage for all users.
Details on dual sense technology, sensors, and entrapment alarms for safety.
Proper placement of warning signs and separate pedestrian access.
Essential safety measures and warnings for automatic gate operation.
Comprehensive specifications including drive, power, control, and operational capacity.
Explore choices for powering the gate operator, including transformer and solar.
Understand solar panel requirements and gate cycle expectations based on location.
Verify gate size, material, and swing for proper installation compatibility.
Instructions for properly grounding the gate operator system for protection.
List of parts included with the gate opener and necessary tools for installation.
List of accessories and materials not supplied with the gate opener kit.
Step-by-step guide for physically mounting the gate operator arm.
Guidance on reinforcing gates and mounting brackets for operator attachment.
How to install the stop plate for the gate's closed position.
Instructions for mounting the control box and connecting the battery system.
Detailed steps for wiring the transformer to the control box.
Instructions for connecting and installing solar panels for power.
How to program the MMT103 digital transmitter for gate operation.
How to program the FM135 dip switch style transmitter for gate operation.
How to configure the gate's fully closed position and test its movement.
Adjusting safety sensitivity and auto-close timer settings for optimal operation.
Guidelines for connecting sensors and other external devices to the control board.
Explanation of terminal connections on the control board for accessories and power.
Diagrams showing typical connections for accessories like push buttons and sensors.
Routine checks and servicing for the gate operator and system.
Guide to diagnosing issues based on beep patterns from the operator.
Guide to diagnosing issues based on status lights and indicators.
Steps for obtaining warranty service and returning components for repair.
List and descriptions of optional accessories for the gate operator.
A checklist to ensure all installation steps and safety requirements are met.
