29
Solar Panel (FM123)
The Solar Panel is a 10 watt solar powered battery charger for use with the Mighty Mule 271 gate operator systems.
Particularly suited for remote installations, each Solar Panel comes with tubular steel support, mounting clips, wire
connectors, and 10 ft. of low voltage wire (see Low Voltage Wire for additional wire). The Mighty Mule control board has
clearly labeled terminal connections for easy installation of the Solar Panel. Installation in some regions of the world will
require multiple solar panels for adequate charging power.
Push Button Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16 gauge stranded, dual
conductor low voltage wire (sold separately).
Pin Lock (FM133)
The Pin Lock substitutes for the clevis pin at the front end of the Mighty Mule gate operators. Helps prevent theft of the
operator from the gate, while allowing quick release of the operator.
MMT103
The MMT103 Code Safe digital transmitter is a wireless radio control designed for use with Mighty Mule garage door
openers and can also be programmed to your Mighty Mule gate openers. One remote for two or three devices.
MMK200 Keypad
The Mighty Mule Wireless Keypad is designed to control access to all Mighty Mule Garage Door Openers. This keypad
features a LED back light that allows you to see numeric keys throughout dark or unfavorable weather conditions.
®
Mounting Post (FM100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad, wireless intercom, or other
access control device from your vehicle. With its break down design it is easy to install and works well in most standard
applications. Surface Mount Flanges (F102) and Extensions (F103) for added height are available.
Mighty Mule Vehicle Sensor (FM138)
The Gate Opening Sensor is designed for residential and agricultural applications and is compatible with most Mighty Mule
automatic gate operator models. The Sensor is an electromagnetic sensor, which offers ‘hands free’ operation of the Mighty
Mule Gate Operator with a 12 ft. radius of detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM143)
A MUST for added security. Solenoid driven, with a steel housing. Used with Mighty Mule DC swing gate operating systems
for maximum stability and security. Comes with a keyed manual release.
AUTOMATIC
GATE LOCK
®
ELECTRONIC SECURITY LOCK
Key Chain Two Button Transmitter (FM134)
The Key Chain Transmitter is a dual button version of the Mighty Mule single button entry transmitter and has the same
adjustable code settings. Used for 2 gates or 1 gate and garage door (when used with in conjunction with a garage door
receiver – RB709U-NB). (Battery is included.)
Single Button Transmitter (FM135)
The Mighty Mule entry transmitter, with adjustable code settings, is standard equipment with all Mighty Mule systems.
(Battery is included.)
Accessories are Available From Your Retail Store
Accessories
To Next Page
Loading...
Need help?
General
