18
1234
1234
Table “C2” Delete memory from the KEYPAD Example
This function deletes all the data contained in the memory.
The “Programming password” must first be entered.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter for the first confirmation
6. Press to confirm
7. Enter for the second confirmation
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table “C3” Enter a combination valid only for output (Relay 1) Example
This function allows a combination valid only for output N° 1 to be entered.
Repeat the operation to enter other combinations.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter the required combination (minimum 1, maximum 9 digits)
6. Press to confirm
7. Enter the same combination a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
To Next Page
Loading...
Need help?
General
