19
GB
1234
1234
4321
4321
Table “C4” Enter a combination valid only for output (Relay 2) Example
This function allows a combination valid only for output N° 2 to be entered.
Repeat the operation to enter other combinations.
1. Enter the programming password
2. Press to confirm the password
3. Press to select the operation
4. Press to confirm
5. Enter the required combination (minimum 1, maximum 9 digits)
6. Press to confirm
7. Enter the same combination a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table “C5” Enter a combination valid for the two outputs and (Relays 1 and 2) Example
This function allows a combination valid for both outputs to be entered.
Repeat the operation to enter other combinations.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter the required combination (minimum 1, maximum 9 digits)
6. Press to confirm
7. Enter the same combination a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard.
To Next Page
Loading...
Need help?
General
