1234
1234
0444444
0444444
20
This function changes the programming password, from the next programming function
on the password will be the one entered in steps 5 and 7.
The programming password can be changed whenever required.
1. Enter the current programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter the new programming password (always 7 digits)
6. Press to confirm
7. Enter the same programming password a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard.
This function cancels a combination valid for output N° 1.
If the combination was valid for the two outputs, it will remain valid just for output N°2.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
5. Enter the combination to be cancelled
6. Press to confirm
7. Enter the combination to be cancelled a second time
8. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table “C6” Change the programming password Example
Table “C7” Cancel a combination valid only for output (Relay 1) Example
To Next Page
Loading...
Need help?
General
