27
GB
This procedure associates the BISTABLE function with output N°2 (see table C19).
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table “C20” Programme output (Relay 2) in the BISTABLE mode Example
Table “C21” Programme outputs and (Relays 1 and 2) in the BISTABLE mode Example
This procedure associates the BISTABLE function with both output N°1 and
output N°2 (see table C19).
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
Table “C19” Programme output _ (Relay 1) in the BISTABLE mode Example
This procedure associates the BISTABLE function with output N°1 so that the output
can be alternatively activated or deactivated. Set the TIMER to 0 seconds to return
to the MOMENTARY mode.
1. Enter the programming password
2. Press to confirm the password
3. Enter to select the operation
4. Press to confirm
N.B.: If the operation was successful 3 tones will be heard
To Next Page
Loading...
Need help?
General
