35
GB
x2
This function allows one or more CARDS valid only for output N° 1 to be inserted.
Repeat the operation at any time to insert other CARDS.
1. Pass the SOLE MASTER in front of the READER once
2. Pass the new CARD in front of the READER once
N.B.: The insertion procedure terminates after 10 seconds unless new CARDS are passed in front of the READER or if the SOLE MASTER
is passed once again. Other CARDS can be inserted after the first, one after the other, repeating point 2 within a further 10 seconds
Table “F5” Insert CARDS valid only for output N°1 (STATIC 1) with the SOLE MASTER Example
Table “F6” Insert CARDS valid only for output N°2 (STATIC 2) with the SOLE MASTER Example
This function allows one or more CARDS valid only for output N°2 to be inserted.
Repeat the operation at any time to insert other CARDS.
1. Pass the SOLE MASTER in front of the READER once
2. Pass the CARD in front of the READER twice
N.B.: The insertion procedure terminates after 10 seconds unless new CARDS are passed in front of the READER or if the SOLE MASTER
is passed once again. Other CARDS can be inserted after the first, one after the other, repeating point 2 within a further 10 seconds.
To Next Page
Loading...
