Nice MORX User Manual

36
x2
x3
Table “F8” Cancel CARDS Example
This function allows a CARD to be cancelled
1. Pass the MASTER in front of the reader twice (see note)
2. Pass the CARD to cancel in front of the READER once
N.B.: If other CARDS are to be cancelled, repeat point 2 for each CARD to cancel.
The cancellation procedure terminates after 10 seconds unless other CARDS to cancel are passed in front of the READER or if the MASTER
CARD is passed once again, or if the CARD to cancel is not memorised.
At step 1, MASTER 1, MASTER 2 or the SOLE MASTER must be used depending on which group the CARD to cancel belongs to.
C
A
R
D
M
A
S
T
E
R
Table “F7” Insert CARDS valid for outputs 1 and 2 (DYNAMIC) with the SOLE MASTER Example
This function allows one or more CARDS valid both for outputs N°1 and N°2 to be inserted,
the choice of which output to activate depends on the use made of the CARD.
1. Pass the SOLE MASTER in front of the READER once
2. Pass the new CARD in front of the READER three times
N.B.: The insertion procedure terminates after 10 seconds unless new CARDS are passed in front of the READER or if the SOLE MASTER
is passed once again. Other CARDS can be inserted after the first, one after the other, repeating point 2 within a further 10 seconds.
C
A
R
D
M
A
S
T
E
R
C
A
R
D

Nice MORX Specifications

General

Brand	Nice
Model	MORX
Category	Control Systems
Language	English