. or - models Install hand chain by wrapping it through chain guard holes and pocket wheel. Allow
chain to hang down towards floor. Cut chain and connect so that chain is to from the floor.
. Install chain keeper to wall near hand chain at approximately from floor. un disconnect chain through
keyhole of chain keeper and cut excess chain links if reuired. Attach keyring to end of disconnect chain.
. If an optional floor level disconnect lever was ordered in lieu of the chain keeper, mount to wall with suitable
hardware. Attach both chains together using keyring provided. Allow disconnect chain to be slightly slack
when lever is in the up position.
To Next Page
Loading...
Need help?
General
