Nice Robus 600P User Manual

Instructions and warnings for the fitter
Istruzioni ed avvertenze per l’installatore
Instructions et recommandations pour l’installateur
Anweisungen und Hinweise für den Installateur
Instrucciones y advertencias para el instalador
Instrukcje i uwagi dla instalatora
Aanwijzingen en aanbevelingen voor de installateur
For sliding gates
Robus
600/600P
1000/1000P

Nice Robus 600P Specifications

General

Brand	Nice
Model	Robus 600P
Category	Gate Opener
Language	English

Summary

1) Warnings

General Safety and Compliance Warnings

General safety information and compliance with European legislation.

Directive-Specific Warnings

2) Product Description and Applications

3) Installation

3.1 Preliminary Checks

Essential checks before starting the installation of the ROBUS unit.

3.2 Gearmotor Installation

Step-by-step guide for physically installing the gearmotor unit.

3.3 Limit Switch Bracket Installation

3.4 Installing Various Devices

3.5 Electrical Connections

3.6 Electrical Connection Descriptions

4) Final Checks and Start-up

4.1 Direction and Power Setup

Setting gate direction and connecting power supply.

4.3-4.4 Device and Leaf Recognition

Process for control unit to recognize devices and measure leaf length.

4.5 Gate Movement Checks

Verifying the gate's movement and operation after installation.

5) Testing and Commissioning

5.1 Testing Procedures

5.2 Commissioning Process

7) Additional Information

7.2 Programming Overview

7.2.1 Level One Functions (ON-OFF)

7.2.2 Level One Programming (ON-OFF)

7.2.3 Level Two Functions (Adjustable Parameters)

7.2.4 Level Two Programming (Adjustable Parameters)

7.2.5 Level One Programming Example

7.2.6 Level Two Programming Example

7.3 Adding or Removing Devices

7.3.2 STOP Input

7.3.3 Photocells

7.3.4 FT210B Photo-sensor

7.3.5 ROBUS in "Slave" Mode

7.3.6 Recognition of Other Devices

7.6 Troubleshooting

7.6.1 Malfunctions Archive

8) Technical Characteristics

User Instructions and Warnings