11
CHARGING AND BATTERY INFORMATION
We recommend fully charging the battery before the headphones rst use. Use the enclosed
USB-C cable to charge the headphones. The charging voltage and electrical current is 5V/1A.
Charge the headphones if the LED indicator (1) starts to shine red. An audio signal will alert
you when only several minutes of use remain. A complete charge of the battery takes approx.
2 hours.
SAFETY INFORMATION
Listening to music on above-average volume can damage your hearing. Do not expose
the headphones to liquids or moisture. Do not expose the headphones to extremely high/low
temperatures
and do not attempt to take the headphones apart. Keep the headphones away from sharp
objects and falling from high places.
SPECIFICATIONS
Bluetooth version: 5.0
Supported Bluetooth proles: A2DP, AVRCP, HFP, SBC, AAC
Frequency: 20Hz - 20kHz
Sensitivity: 97+/-3dB
Playback period: up to 32 hours (on 70% volume)
Conversation period: up to 32 hours
Range: up to 10 m
Battery: 380mAh
Speaker: 40mm
Charging period: 2 hours
To Next Page
Loading...
