Niceboy ORYX - Controller Modes; Android Connection; iOS Connection; PC Connection via Cable

11
CONTROLLER MODES
Android connection
With the controller switched o, hold the „A“ button along with the „MODE“ buttons until the
LED indicators ash rapidly after a period of blinking slowly. In the Bluetooth settings of your
phone, connect the controller to your device. When properly connected, the rst LED on the
controller should remain lit. Download „Shootingplus V3“ to map buttons for dierent games.
iOS connection
With the controller o, rst press the „B“ button and then the „MODE“ button until the LED
indicators switch from slow to fast ashes. You can release the buttons now; in the Bluetooth
settings of your phone, connect the controller to your device. When properly connected, the
fourth LED on the controller should remain lit.
PC connection via cable
Connect the switched o controller to the PC via USB. The controller will connect automatically
and the rst LED will light up.
PC wireless connection (dongle)
D-input – regular connection
Connect the 2.4Ghz USB Dongle to your PC. With the controller o, press the LB + MODE
buttons for 3 seconds. Release the buttons; after 5 seconds, the controller should connect to
the PC. When properly connected, the rst and second LED should remain lit.
X-input – for Xbox mode
Press SELECT + Start buttons to switch between D-input and X-input mode
TV/Multimedia connection
Connect the 2.4Ghz USB Dongle to your device.
With the controller switched o, rst click the „SELECT“ button and then the „MODE“ button.
Release the buttons; after 5 seconds, the controller should connect to the device. When
properly connected, the second LED should remain lit.