15
ATTACHING THE CAMERA TO THE GLASS
Youattachthecameratothecarglassusingtheadhesivepart(1)
onthetopofthecamera.The3Mstickerisusedforpermanent
attachment(afterremovingandre-sticking,itwillnolongerhold
perfectly).Adjusttheangleofthecamera(forthecorrectshotofthe
lens)usingtherotatingpart(9).Onlygluetheholdertotheglass.
Beforesticking,cleantheglassproperly(degrease),theglassmust
becompletelydry.Installattemperaturesaround20°C.
MICROSD CARD
ChooseabrandedmicroSDcardwithfastvideorecording(type
UHS-IU3andfaster)withamaximumcapacityof64GB.Before
usingthecardforthersttimeinthecamera,itisnecessaryto
formatthecardonaPCtotheFAT32lesystem(formattingthe
memorycardwillerasealldataonthecard).
Recommendation: regularly format the memory card in the PC to avoid
problems when recording video. If you use the camera daily, format
the card at least once a month. More information about the use of the
memory card and its formatting will be provided by the manufacturer of
the selected memory card.
CAMERA POWER SUPPLY
Thecameracanbeconnectedtothepowersourceusingacar
adapter(partofthesalespackage),orviaaUSBcableconnectedto
aPCoranadapterforchargingamobilephone.Apowerbankcan
alsobeused.FortheGPSfunction,itisnecessarytoconnectthe
cameratothepowersupplyonlyusingthesuppliedoriginalcable
withGPS.
Warning: the camera is not equipped with a battery, but with a
supercapacitor, which is safer from the point of view of use in a car (it
is not damaged due to temperature changes, it tolerates both frost and
high temperatures better). For this reason, the camera can only be used
when permanently connected to the power supply.
AUTOMATIC CAMERA ON/OFF
Themomentthecameradetectscharging,itautomaticallyturnson
andstartsrecording(amemorycardmustbeinserted).Whenthe
cameraisdisconnectedfromthepowersupply,itstopsrecording
videoandturnso.