Need help?Do you have a question about the Niceboy RAZE and is the answer not in the manual?
Press the On/Off button for 3 seconds to activate the speaker. LED indicator flashes blue.
Activate Bluetooth on your device and select 'Niceboy RAZE' from the list of available devices.
Device connects to speaker; acoustic prompt and blue LED indicate successful pairing.
Connect the speaker using an AUX cable to an audio source for playback.
Use the built-in NFC chip on the phone and speaker to fast connect via Bluetooth.
Controls for playback, call management, volume, and track changes in Bluetooth mode.
Controls for volume increase and decrease when using AUX mode.
Bluetooth pairing mode (blue flashing) and AUX mode (green light).
Indicator status for Bluetooth on, AUX mode, ready to pair, connected, and recharging.
Details on Bluetooth version, transmission reach, speaker specs, battery, input, and dimensions.
Recommends a USB charger providing at least 5V/1A for optimal charging.
Explains that distance may cause deteriorated audio quality or stability.
Speaker turns off automatically after 10 minutes of inactivity to save battery.
Order of priority: AUX-IN connection, Bluetooth incoming call, Bluetooth music playback.
Connect to charger and try turning on again after a few minutes.
General| Bluetooth | Yes |
|---|---|
| Waterproof | Yes |
| Protection | IPX7 |
| Bluetooth Version | 5.0 |
| Charging Time | 2-3 hours |
| Frequency Response | 100Hz - 20kHz |
To Next Page