14
NFC FUNCTION
There is a built-in NFC chip in the speaker. Activate the NFC function on the phone and put
the phone close onto the NFC position of the speaker. Then, do according to the phone
instructions to fast connect the phone with the Bluetooth speaker via NFC function.
BASIC OPERATIONS
BLUETOOTH mode
1. Short press to control playback/pause.
2. Short press to receive incoming call.
3. Double press to refuse incoming call.
4. Short press during a call to hang up
1. Short press to increase volume.
2. Long press to change over to next track.
1. Short press to reduce volume.
2. Long press to change over to previous track.
AUX mode
Short press to increase volume.
Short press to reduce volume.
LED INDICATOR
EN
STATUS ON LED INDICATOR
On
Blootooth pairing mode with blue-ashing LED indi-
cator is initial. The speaker will change over to the
AUX mode and the LED indicator starts lighting green
whenever you connect the device via the AUX cable.
To Next Page
Loading...
