Niceboy VEGA X PRO - Connecting the Camera to a Pc

33
Notice: Fully charge the battery before the camera’s rst use. Don’t
expose the camera to large temperature dierences. Supervise the
camera while the battery is charging. The time it takes to charge the
battery depends on the electrical current type used by your adapter
of choice. The camera charges faster when powered o.
CONNECTING THE CAMERA TO YOUR TELEPHONE VIA WI-FI
Install the free app iSmart DV to your phone (located in the App-
store for iOS and on Google Play for Android). Do not open the app
after it has downloaded, instead follow these steps:
1. Turn on the Wi-Fi on the camera via the quick menu or by
pressing the Wi-Fi button (7) on the camera.
2. Open the Wi-Fi settings on your mobile device and connect to
the camera’s network (name: Niceboy VEGA X PRO, password:
123456789).
3. Once your mobile device is connected to the camera’s network,
launch the app from where you will be able to control the came-
ra via your mobile device.
4. Press the Wi-Fi button (7) on the camera to turn of the Wi-Fi.
Notice: enable all app permissions in your phone settings, turn o
your phone’s “data connection”, and leave Wi-Fi on before using the
app. The app is compatible with mobile phones with iOS 9.0 and
newer and mobile phones with Android 8.0 and newer.
CONNECTING THE CAMERA TO A PC
Use the enclosed USB cable to connect the camera to a PC. In the
camera’s settings menu (item USB) choose how you would like to
use the camera while it’s connected to a PC:
1. External disk: les saved on your memory card inside the came-
ra may be managed while connected to a PC (the camera acts
as external storage connected to a PC).
2. PC camera: camera may be used as a PC camera when used by
programs that allow the connection of external cameras.