NICEDAY 305M - Pedal Installation; Left and Right Pedal Securing

Step 9：Remove the nut on #18L Left Pedal
by turning CLOCKWISE, than insert #18L Left
Pedal into left crank with hand in
COUNTER-CLOCKWISE firstly, and use B:
Open-end Wrench 14-15 to secure the pedal.
Finger tighten the nut COUNTER-CLOCKWISE
back onto #18L Left Pedal. Hold #18L Left Pedal with B: Open-end Wrench 14-15
and use C: Open-end Wrench 13-24 to lock the pedal CLOCKWISE to the crank. Please
make sure pedal and nut is fully secured, or it may cause damage to pedal and crank in
further.
Step 10：Remove the nut on #18R Right
Pedal by turning COUNTER-CLOCKWISE ,
than insert #18R Right Pedal into right crank
with hand in CLOCKWISE firstly, and use B:
Open-end Wrench 14-15 to secure the pedal.
Finger tighten the nut CLOCKWISE back onto
#18R Right Pedal. Hold #18R Right Pedal with B: Open-end Wrench 14-15 and use
C: Open-end Wrench 13-24 to lock the pedal COUNTER-CLOCKWISE to the crank.
Please make sure pedal and nut is fully secured, or it may cause damage to pedal and
crank in further.
11
C
B
C
B