APP Instructions for Use
(Note: The scenario simulation function in the KINOMAP & Zwift APP is free for a
limited time. The final right of interpretation belongs to the official KINOMAP & Zwift
APP. )
1.FUNCTIONS OF THE BLUETOOTH :
1.1 Working frequency: This wireless transmitter is a Bluetooth 4.2 device. Its working
frequency is 2.4GHZ.
1.2 Requirements for Cell-phone APP Installation:
1.2.1 IOS cell-phone system should be no lower than 7.1 version and support Bluetooth 4.2,
iphone 4s and beyond.
1.2.2 For Android, a system no lower than 4.3 is required and the cell-phone shall support
bluetooth 4.2.
1.3 The wireless transmitter only records the user's data when connected to the mobile
phone and sends it to the mobile app. Before starting sports equipment, please connect the
app to the transmitter to ensure the authenticity and validity of the data.
1.4 The transmitter will go into Sleep mode if it receives no signal input in 2 minutes. In
Sleep mode, transmitter is unavailable for cell-phone. In this situation, wake up the Bluetooth
transmitter by using the sports equipment and it can be found by the cell-phone again.
Note:
1. Search "iconsole" "Kinomap" "Ziwft"and"Pelton" download it on your phone or Ipad.
2. Once console is connected to smart device via Bluetooth, the console will power off.
3. Search "How to connect your monitor with iconsole and Kinomap" on YOUTUBE or scan
the QR code below to check out how to connect APP.
18
To Next Page