OPERATION
I-Workout setting
Press MODE key to select the function of TIME, DISTANCE, CALORIES. Use SET Key
for setting and press MODE key for confirmation.
For instance, the time set-up, when the time value is blinking, you can use SET Key to adjust
the number. Press MODE key for confirmation and skip to next set-up. The set-up of
DISTANCE, CALORIES is the same as TIME set-up.
Once the workout begins and the console picks up the exercise signal, the value of
SPEED,RPM, TIME, DST and CAL will count up on the display.
17
II-Trouble shooting
. When the display of LCD is dim, it means the batteries need to be changed.
. If there is no signal when you pedal, please check if the cable is well connected.
NOTE:
1. When stop training for 4 minutes, the main screen will be off.
2. If the computer displays abnormally, please re-install the 2*AAA batteries and try again.
3. The pulse will be only showed when connected by professional heart beat straps or
monitor.
To Next Page