EasyManua.ls Logo

Niche Duo - Introduction

Niche Duo
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Introduction
Thank you for purchasing the Niche Duo. The Niche Duo is a domestic
coffee grinder, intended for use with two specialised sets of 83mm at
burrs - one set engineered for exceptional espresso and the other set
for awless lter brewing.
Please take a moment to familiarise yourself with the diagrams on
these pages - the terminology is used later in these instructions.
Espresso Burr Set
(Black)
Filter Burr Set
(Blue)
Upper
burr carrier
Lower
burr carrier
IMPORTANT: YOUR NICHE DUO HAS BEEN ZEROED DURING
MANUFACTURE AND IS READY TO USE IMMEDIATELY. ‘ZEROING’
DESCRIBES THE PROCESS OF ALIGNING THE BURRS SO THE ‘0’
MARK ON THE GRIND DIAL REFERS TO THE POSITION WHERE
THE BURRS JUST BEGIN TO TOUCH. ZEROING YOUR
NICHE DUO IS NOT NECESSARY, EVEN WHEN CHANGING
BETWEEN THE BURR SETS OR CLEANING. PLEASE SEE THE
‘ZEROING THE NICHE DUO’ SECTION FOR MORE INFORMATION.

Related product manuals