Nidec Unidrive M300 - Page 27

SI-Ethernet User Guide 27
Issue: 3
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started
Parameters
Key features
and Protocols
PC Tools
Applications
Security Diagnostics
Glossary of
terms
Index
5.10.6 Menu 11 - Synchronization
Table 5-10 Menu 11 parameters
Parameter Range Default Access
Size
(Bits)
S.11.000 Parameter mm.000 0 to 65535 RW 16
S.11.001 Preferred Sync Master 0 to 4
1RW8
S.11.002 Master Clock Domain 0 to 3
0RW8
S.11.005 Grandmaster MAC Address
0000000000000000 to
FFFFFFFFFFFFFFFF
RO 64
S.11.006 Sync Jitter From Grandmaster
-2147483648 ns to
2147483647 ns
RO 32
S.11.007 Sync Jitter Threshold 500 to 1000000 ns
1000 ns RW 32
S.11.008 Module Sync Flag 0 (Off) to 1 (On)
0 (Off) RO 1
S.11.009 Inhibit Drive Synchronisation 0 (Off) to 1 (On) 0 (Off) RW 1
S.11.010 PTP Date
00-00-00 to
31-12-99
RO 32
S.11.011 PTP Time
00:00:00 to
23:59:59
RO 32
S.11.015 PTP Delay Select
1 (P2P DELAY) to
2 (Off)
1 (P2P DELAY) RW 8
S.11.016 PTP Sync Rate -4 to 0 -4 RW 8
S.11.017 In sync window length 2 to 255 s 20 s RW 8
S.11.020 Network Error Count 0 to 4294967295
RO 32
S.11.022 Interoption Sync Status
0 (MASTER) to
2 (INDEPENDENT)
RO 8
S.11.030
Easy Mode Maximum Network
Delay
1 to 100 ms 3 ms RW 8
S.11.040 Rx1 Late Sync Frame Action 1 (Trip) to 3 (Use) 1 (Trip) RW 8
S.11.041 Rx1 Late Sync Frame Dest
0 (This slot) to
4 (Slot 4)
0 (This slot) RW 8
S.11.042 Rx1 Late Sync Frame Event
0 (No Event) to
4 (Event3)
0 (No Event) RW 8
S.11.050 Rx2 Late Sync Frame Action 1 (Trip) to 3 (Use) 1 (Trip) RW 8
S.11.051 Rx2 Late Sync Frame Dest
0 (This slot) to
4 (Slot 4)
0 (This slot) RW 8
S.11.052 Rx2 Late Sync Frame Event
0 (No Event) to
4 (Event3)
0 (No Event) RW 8
S.11.060 Rx3 Late Sync Frame Action 1 (Trip) to 3 (Use) 1 (Trip) RW 8
S.11.061 Rx3 Late Sync Frame Dest
0 (This slot) to
4 (Slot 4)
0 (This slot) RW 8
S.11.062 Rx3 Late Sync Frame Event
0 (No Event) to
4 (Event3)
0 (No Event) RW 8