Need help?Do you have a question about the Nidec Unidrive M300 and is the answer not in the manual?
General| Compatible Drive | Unidrive M300 series |
|---|---|
| Network Protocols | EtherNet/IP |
| Communication Ports | Ethernet |
| Max Data Rate | 100 Mbps |
| Operating Voltage | 24 V DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Weight | 200 g |
Covers warnings, cautions, hazards, and installer competence requirements.
Details installer responsibilities for correct installation and regulatory compliance.
Information on electrical hazards, shock risks, and stored charge precautions.
Addresses mechanical hazards and restricting equipment access to authorized personnel.
Guidelines for hazardous environments, motor safety, brake control, and EMC.
Step-by-step guide for physically installing the SI-Ethernet option module.
Details module connections, LEDs, and cabling/grounding best practices.
Fundamentals of network design, addressing, and etiquette.
Provides a step-by-step flowchart for setting up the Ethernet interface.
Covers parameters for Ethernet configuration (Menu 2) and resources (Menu 9).
Covers PC/PLC considerations and Modbus TCP/IP protocol details.
Details RTMoE protocol for real-time motion, message rates, and types.
Covers EtherNet/IP support, RPI timeout, and read consistency.
Accesses attributes for monitoring drive running state and control.
Creating, managing, and assigning privileges to user accounts.
Interface for editing parameters and configuring user session timeout.
Software tools for commissioning, programming, and monitoring drives.
Information on LED diagnostics, drive trip codes, and error handling.
Details hardware fault codes and recommended actions for troubleshooting.
A flowchart to help diagnose common Ethernet setup and network problems.
To Next Page