Need help?Do you have a question about the Nidek Medical LT-1000 and is the answer not in the manual?
General| Brand | Nidek Medical |
|---|---|
| Model | LT-1000 |
| Category | GPS |
| Language | English |
General safety guidelines for servicing the instrument.
Specific safety precautions to follow while performing service.
Procedure for diagnosing and resolving issues when the LT-1000 fails to start.
Steps to troubleshoot abnormal or non-functional color LCD display issues.
Troubleshooting guide for when the touch panel input is unresponsive.
Diagnosing and fixing problems where the main screen fails to appear on the LCD.
Troubleshooting steps when the device fails to trace frames.
Instructions for removing the top cover assembly of the LT-1000.
Procedure for removing the cable cover from the unit.
Steps for safely removing the rear cover of the LCD unit.
Guide for replacing the main tracer assembly unit.
Procedure to replace the internal switching power supply unit.
Instructions for replacing the various cable assemblies within the device.
Steps for replacing the cooling fan assembly.
Procedure to replace the color LCD display module.
Steps for replacing the inverter component for the LCD backlight.
Procedure for replacing the BA04 printed circuit board.
Procedure for replacing the BA01 printed circuit board.
Procedure for replacing the BA02 printed circuit board.
Procedure for replacing the BA05 printed circuit board.
Procedure for replacing the BA03 printed circuit board.
Steps for replacing the seesaw switch component.
Procedure to calibrate the touch panel for accurate input.
Steps for calibrating the tracing unit for accurate measurements.
Instructions for navigating and displaying the parameter setting screen.
Procedure for adjusting the instrument's internal clock and date settings.
Steps to update the LT-1000's firmware using a CF card.
Detailed wiring schematic of the LT-1000 system components.
Visual overview of the LT-1000's front and rear external features.
Identification and location of important labels and warnings on the unit.
List of error codes, their details, and recommended remedies for troubleshooting.
Default factory settings for the tracing unit's machine mode and protocol.
Comprehensive table detailing available parameters, their factory settings, and ranges.
Glossary of screw types and abbreviations used in the service manual.
To Next Page