Need help?Do you have a question about the Nidek Medical LT-900 and is the answer not in the manual?
General| Brand | Nidek Medical |
|---|---|
| Model | LT-900 |
| Category | GPS |
| Language | English |
General safety guidelines for service personnel, tool usage, power handling, and maintenance-specific precautions.
Safety measures for adjustments, electrical wiring, and power cord handling.
Instructions on interpreting troubleshooting flowcharts and references to wiring diagrams for component replacement.
Troubleshooting steps for a system that does not power on, involving voltage, fuses, and power supply checks.
Diagnosing and resolving switch issues and poor accuracy, typically by replacing boards or performing calibration.
Troubleshooting stylus detachment and pattern tracing failures, including frame checks and sensor adjustments.
Steps for removing the top cover and replacing the tracer assembly, including necessary disconnections.
Procedures for replacing BA02 and BA11 electronic boards, including data backup and program writing.
Guidance on updating system programs (ROM CPU) and replacing the main fuse.
Step-by-step guide for performing automatic calibration, involving specific button presses and frame setup.
Procedure for torque calibration, requiring simultaneous button presses and slider position checks.
Comprehensive steps for full calibration, utilizing various jigs and verifying LED status after tracing.
Steps to adjust the clamp switch (CA64) position, involving slider movement and micro switch setting.
A comprehensive wiring diagram illustrating component connections, signal flow, and part numbers.
A list of general tools necessary for performing repair and maintenance operations on the system.
A list of necessary consumables for repair work, such as adhesives, solder, grease, and cleaning solutions.
A list of calibration jigs used for adjustment procedures, including their model numbers and quantities.
To Next Page