Nidek Medical NT-510 User Manual (English)

Other manuals for Nidek Medical NT-510

Questions and Answers:

J
jeremy35Aug 16, 2025
What to do if a measurement error appears on Nidek Medical NT-510?
- D
  Dr. Jason YoungAug 17, 2025
  A measurement error might appear on the Nidek Medical Blood Glucose Meter if the patient blinked during measurement. To resolve this, instruct the patient not to blink and try the measurement again. It can also happen if the eyelid or eyelashes obstruct the measurement. In this case, instruct the patient to open his/her eye wider, or gently lift the patient’s lid, being careful not to press against the eyeball. Also, the data may exceed the measurable limit.
L
Leslie WilliamsAug 19, 2025
What to do if Nidek Medical NT-510 Blood Glucose Meter shows “ERROR” or “NO PAPER”?
- D
  Deanna JonesAug 19, 2025
  If you see “ERROR” or “NO PAPER” on your Nidek Medical Blood Glucose Meter, even with paper loaded, ensure the printer cover is securely closed. Open the printer cover and close it securely. Also, avoid pressing the print button immediately after closing the cover, as the printer requires a moment to get ready.
R
rkimAug 22, 2025
How to fix Nidek Medical NT-510 Blood Glucose Meter when data is not printed out?
- Z
  Zachary GarciaAug 22, 2025
  If data is not printing from your Nidek Medical Blood Glucose Meter, first check the printer paper and load new paper if it has been used up. Also, verify that the PRINT parameter is not set to NO and reset it if necessary.
L
Loretta SweeneyAug 25, 2025
Why is auto-tracking not working on my Nidek Medical Blood Glucose Meter?
- Z
  zbassAug 26, 2025
  If the auto-tracking or auto-shooting function isn't working on your Nidek Medical Blood Glucose Meter, first ensure these functions are turned on using the auto button. If the issue persists, room illumination might be reflecting on the cornea; try changing the device's location. These functions may also not work on some eyes, such as those with keratoconus or recently-operated corneas; in such cases, turn off the auto-tracking function and start measurement manually. The same applies to patients with substantial ocular ataxia or who cannot fixate their eyes. Also, if the device is exposed to sunshine, light interference may adversely affect these functions. Change the installed position of the device and start measurement again.
J
Jordan MccoyAug 27, 2025
How to turn on the LCD display on Nidek Medical NT-510 Blood Glucose Meter?
- P
  Philip DavisAug 28, 2025
  If the LCD display of your Nidek Medical Blood Glucose Meter does not turn on, ensure the power cord is securely connected. Also, check that the power switch is turned on.
T
Tyler BarnesAug 30, 2025
What to do if printer paper does not feed in Nidek Medical NT-510 Blood Glucose Meter?
- B
  brookskatieAug 30, 2025
  If the printer paper does not feed in your Nidek Medical Blood Glucose Meter, the paper may be loaded in a tilted position, or the core of the roll may not be placed properly. Open the printer cover and make sure that the printer paper is properly loaded.
D
David WoodwardSep 2, 2025
Why Nidek Medical NT-510 printer operates but doesn't print results?
- E
  Emily OnealSep 2, 2025
  If the printer on your Nidek Medical Blood Glucose Meter operates but doesn't produce results, the printer paper may be loaded with the wrong side up. Ensure the paper is loaded with the correct side facing up.
C
Crystal WintersSep 4, 2025
What does “PRESSURE PEAK ERROR” mean on Nidek Medical NT-510 Blood Glucose Meter?
- A
  Alexis AdamsSep 5, 2025
  If you receive errors like "PRESSURE PEAK ERROR", “PRESSURE SLOPE ERROR" or “NO PRESURE UP" on your Nidek Medical Blood Glucose Meter at start-up, turn off the power while in Measurement mode and clean any contamination from the air nozzle.
N
Nancy GatesSep 7, 2025
Why does the screen disappear suddenly on Nidek Medical Blood Glucose Meter?
- K
  Kevin WilliamsSep 7, 2025
  If the screen on your Nidek Medical Blood Glucose Meter disappears suddenly, sleep mode may have been activated. Press any button to exit from sleep mode.
T
Tiffany AndersonSep 12, 2025
Why is Nidek Medical NT-510 Blood Glucose Meter LCD display not clear?
- H
  Hannah RosalesSep 12, 2025
  If the LCD display on your Nidek Medical Blood Glucose Meter is not clear even when the power is on, the sleep function may have been activated. Try to recover the monitor ON condition by pressing any button.

Nidek Medical NT-510 Specifications

General

Brand	Nidek Medical
Model	NT-510
Category	Blood Glucose Meter
Language	English

Nidek Medical NT-510 Service Manual

Table of Contents

Other manuals for Nidek Medical NT-510

Questions and Answers:

Nidek Medical NT-510 Specifications