Niezgodka 21 - Declaration of Conformity

Niezgodka GmbH
www.niezgodka.de

GB
1
Declaration of Conformity
according to Annex VII of Directive (PED) 97/23/EC
KON-3
04 / 2014
1
3
4
5
11
13
14
18
21, 22
24
33
35
9
91
90
SE-ÜR-91
DN 50
DN 25
DN 15
DN 10
DN 50
DN 25
DN 20
DN 50
DN 25
DN 25
DN 25
DN 50
DN 50
DN 50
DN 25
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DN 10
DN 15
DN 8
DN 8
DN 10
DN 15
DN 10
DN 10
DN 20
DN 15
DN 15
DN 15
DN 25
DN 15
DN 15
DN 15
ManufacturerHamburg, 02.03.2014 authorized subscriber
The signing manufacturer confirms by this declaration that design, manufacturing and inspection of these pressure equipments
are in compliance with the directive 97/23/EC as well as with the national specifications DIN EN 12266, DIN EN 12516,
AD 2000-leaflet A4 match:
The below pressure equipments are falling under Article 3, Paragraph 3, and it is not allowed to provide them with
CE-marking which is spezified in annex VI.
To document the conformity with the directive 97/23/EC directly at the pressure equipment, it will provide with the
following sign.
Type Nominal Size Inlet Pressure accessory
Management: Dorrit Niezgodka, Verena Niezgodka-Seemann
Registered at the District Court Hamburg, HRB No. 29139
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Relief-Valve
Vacuum-Relief-Valve
Vacuum-Relief-Valve
Vacuum- and Pressure-Relief-Valve
Overflow-Control-Valve
PED: Pressure Equipment Directive
SEP: Sound Engineering Practice
P E D
S
P
Niezgodka GmbH
Bargkoppelweg 73
DE-22145 Hamburg