Need help?Do you have a question about the Nightingale CXO 6200 series and is the answer not in the manual?
General| Brand | Nightingale |
|---|---|
| Model | CXO 6200 series |
| Category | Indoor Furnishing |
| Language | English |
Adjust chair height by tilting the lever up while seated or with no weight on seat.
Unlock seat position by lifting the middle lever, move seat, and release to lock.
Lock tilt by turning the left lever up; unlock by turning it down and leaning back.
Increase tension by turning the front knob clockwise; decrease counter-clockwise.
Lift trigger to adjust arm height; pull out to widen, push in to contract width.
Adjust armrest angle by pressing the front button; slide for front/back position.
Lift or lower headrest for desired position; it locks automatically and can be tilted.
Push in to adjust lumbar depth; lift to change height. Reset button releases.
Lubricate the mechanism annually with light sewing machine oil to ensure longevity.
Clean mesh with mild detergent and water using a damp cloth; rinse and air dry.
Wipe plastic parts with a damp cloth and mild detergent; avoid abrasives.
Clean powder-coated frames with a damp cloth and mild detergent.
To Next Page
