Dome 5.8GHz A/V Sender
Order Code : A43KK
User Manual
408-
1
To prevent fire or shock hazard, do not expose this product to rain and
moisture. For example: do not use near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or nearby a swimming pool. To
avoid electric shock, do not take apart this product, provided as an
accessory. This product should be operated only under power supply.
Do not overload wall outlets and extension outlets as this can result in
the risk of fire or electric shock.
Contents
1.Important Safety Information
1.Important Safety Information.......................................1
2.Package Content........................................................2
3.Panel Control And Function......................................... 3
4.Setup Guide...............................................................4
5.Orient Transmitter/Receiver for optimal performance.....5
2.Package Contents
Check to make sure that all units shown as below are enclosed.
If something is missing, please contact your dealer.
3. IR Cable LED x 1
2. 5.8GHz Receiver x 1
UHF:433.92MHz
4.
(9V/ 500mA) x 2
Power Adapters
1. 5.8GHz Transmitter x 1
5. Cables x 2
2
UK/Eire Type
Type(UK/Eire SCART Cable)
2.Package Contents3.Panel Control and Function
1
3
4
2
1. UHF Antenna
2. ON/OFF Switch
3. Power Indicator/IR Windows
4. IR mouse jack (transmitter only)
Channel selection button to find optimal reception (receiver only)
5. Power Adapter Jack
6. DIP switch for ID code, the transmitter and receiver
must to be configured as the same ID code.
7. A/V Jack
5
6
7
ID Code
3
Transmitter/Receiver
Note:
To eliminate static or unclear pictures caused by improper
installation, please check the power of transmitter is already on,
then turn off receiver power, press still on the channel selection
button of receiver until you have turned on receiver power again.
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
ID 2
1 2 3
ON
1 2 3
ON
ID 1 ID 4ID 3
ID 6ID 5 ID 8ID 7